Skip to content

News

RSS
  • Faradite TAP 5 brushed copper Loxone Switch
    September 16, 2019 Chris @faradite

    Using the Faradite TAP range with Loxone

    The Faradite TAP switch plate range provide a digital output that pluses for the duration of the button press. This pulse acts as an input into the Loxone system and can then be utilised in Loxone config to provide a nearly endless range of functionality, we will look at the range of functions later in this blog. 
    Read now
  • Faradite Control4 Control 4 C4 Motion Sensor PIR 12V PIR 24v PIR Smart Home Home Automation
    August 22, 2019 Matt @faradite

    Using the Motion Sensor 360 - Volt Free with Control4

    The Faradite Motion Sensor 360 range is compatible with several Home Automation systems including Control4. In this blog we take a detailed look at integrating our Motion Sensor 360 - Volt Free with Control4.

    The Faradite Motion Sensor 360 Volt Free has a silent volt free relay which closes for the duration of motion plus ~1second when motion is sensed. When connected to a contact closure on a Control4 system the signal can be utilised in Control4 Composer to provide a great range of automation functionality.

    Read now
  • Faradite Motion Sensor flush 24V Discreet Small Sensor Loxone Crestron Lutron Rako Control4
    August 14, 2019 Matt @faradite

    Multiple Motion Sensors In One Room - When and Why?

    If we are using the motion sensor to trigger lights but also to provide a heating override option, we want to make sure the sensor is not only covering thoroughfares to trigger as soon as someone enters but it is also going to cover users as they use the room. In some instances, we might need to consider multiple motion sensors in the same room.
    Read now
  • Motion Sensor Faradite Small Flush Discreet 24V PIR Control4 Lutron Rako
    January 24, 2019 Chris @faradite

    Motion Sensor Placement

    Motion sensors provide an essential part of most effective 21st century smart homes and the functionality they allow is vast. Simply speaking, the purpose of a motion sensor is to detect a person entering or moving around the room. The...

    Read now
  • Faradite Motion Sensor 24V PIR home automation Smart Home Control4 Lutron Crestron Rako Loxone Savant
    July 31, 2018 Zoe @faradite

    What motion sensor do I need?

    Ensuring you pick the right sensor for your project is essential to ensuring your overall system functions as expected. Faradite motion sensors are designed to connect to low voltage smart home / building automation control systems. Our sensors are not designed...

    Read now
  • The TAP-5 is future proof
    October 29, 2016 Chris @faradite

    The TAP-5 is future proof

    The TAP-5 can be configured to control anything connected to your Loxone system, this includes Music, Lights, Shading, Alarm etc... Your home automation specialist will be able to advise on suitable functionality and button layout. If you change your mind in...

    Read now
  • Getting the most out of your TAP-5
    October 29, 2016 Chris @faradite

    Getting the most out of your TAP-5

    We recommend that you use the same button layout in each room, even if a room does not have any secondary functions such as blinds and music - simply leave the buttons unconnected - you never know what you might want to add...

    Read now