Home / Collections / All / TAP-5 Matt White

TAP-5 Matt White

£ 57.75 exVAT

£ 69.30 incVAT

TAP-5 Matt White

TAP-5 Matt White

£ 57.75 exVAT £ 69.30 incVAT

has been successfully added to your cart . Feel free to continue shopping or check out .

description

Its more than just a light switch. The TAP range is a collection of contemporary modern switch plates for use with 24V home automation systems.

Each switch plate uses touch sensors with vibration feedback to control your home and temperature sensors are built in as standard. We believe that knowing the temperature of each room is the key to an energy efficient smart home.

Effortless control. The TAP-5 with its 5 buttons can be configured to control your lights, blinds, music and heating all from one switch plate.

We are very proud of our finishes which are engineered to precision with a finger proof coating and the ability to be engraved to further customise the switch (engraving metallic only).

The TAP Range can be wired in two ways, it can either be connected to the Loxone Tree bus using the Nano DI Tree module, or it can be connected directly to the digital inputs of the Loxone Miniserver. See below for links to both wiring diagrams.

The TAP range is packed full of features:

- Large defined capacitive touch buttons
- Compatible with Loxone's single/double/triple click/long press
- Haptic vibration upon touch
- Rotary and laser engravable (metallic finishes only)
- UV stable plastic with finger proof coating
- Low profile design
- Built in 1-Wire temperature sensor
- 1 (TAP1) / 5 (TAP5) * 24V digital outputs
- Integrated test points
- Push-fit connectors
- CE and RoSH compliant
Compatible with a single gang UK and EU backboxes (please select variant using drop down during ordering)
- 2 x 25mm electrical screws included (For UK backboxes only, EU backboxes typically come with screws included)

Electrical Specification

- Power consumption: 10ma on standby, 40ma during press @ 24V
- Supply: 24V
- Dimensions: 86mm x 86mm x 4.7mm
- Conductor cross section min AWG 24 - max 20 AWG
- Stripped cable length: 5mm
- Protection: IP20
- Temperature Sensing: -55°C to +125°C (-67°F to +257°F) ±0.5°C accuracy from -10°C to +85°C

Due to a power supply issue the TAP Range is not compatible with the Loxone Nano IO Air module, please contact us for more information if you wish to use the TAP range with the Loxone Nano IO Air module.

We aim to dispatch all orders, placed before 12:00, on the same day for next day delivery in the UK. We use DPD or UPS for domestic UK orders, and FedEx or DHL for international orders. All shipping charges will be automatically calculated at the checkout. All transactions are carried out in pounds sterling.

If you have any questions regarding shipping please email info@faradite.com and we will aim to get back to you within 24 hours.

The contemporary look of the Matt White TAP range enables it to blend seamlessly with most decors, but it certainly doesn’t go unnoticed with it’s clean lines and stylish matt finish

Connects simply to Loxone

The TAP-5 can be connected to a Loxone smart home via Loxone Tree Technology or directly to a Loxone Miniserver.

Connect via Loxone Tree
The TAP-5 connects direclty to the Tree bus using a Nano DI Tree
Connect to Loxone Miniserver
The TAP-5 connects directly to the Miniserver using digital inputs

EU & UK Backboxes

As of 1st May 2018, the Faradite TAP range is available for both UK and EU backboxes. Please ensure you select the right option for your country when ordering by using the drop down box.

By utilising the recessed screw lugs in UK backboxes we are able to offer a slimmer design for the UK. The EU TAP range is thicker due to a spacer that gets fitted on the back of the plate during installation. If the EU option is selected we will ship you the switch plate and the EU adaptor.

If the look of the EU TAP range is desired in the UK market, then the EU range also fits perfectly on UK backboxes.

Connects to Loxone

Faradite TAP Range

It's not just a light switch

The Faradite TAP switch plates have been designed for use with 24V home automation systems such as Loxone.

They integrate with your smart home control system, providing a stylish wall-mounted interface to control your lights, music, blinds and much more.

TAP-5 Brushed Stainless Steel
  • Temperature sensor

    All our switches come with a temperature sensor. Knowing the temperature of each room is the key to an energy efficient smart home

  • Touch vibration

    Our favourite feature - the TAP Range gives tactile vibration feedback at each touch, and works with double/triple click functions

  • 24V

    Compatible with Loxone and other 5-30V home automation systems

  • Digital outputs

    Connects to the digital inputs of smart home automation systems, allowing your switch plate to control multiple devices

Technical Specification

Technical Specification
  • DS18B20

    Measures temperatures from -55°C to +125°C (-67°F to +257°F) ±0.5°C accuracy from -10°C to +85°C Each device has a unique 64-Bit serial code stored in an on-board ROM

  • Wire Gauge

    Conductor cross section min AWG 24 - max 20 AWG

  • Mounts

    60mm centre for UK & EU back boxes (please ensure that you select the correct variant for your country)

  • Easy access test points

    The TAP-5 comes with easy-to-access test points which have been built in alongside the push-fit connectors allowing you to probe the digital outputs when installed